RetroPie Project – Case Completion
I’m happy with the case so far. It currently features the following:
- [Rear I/O] – RJ45 CAT5e socket
- [Rear I/O] – HDMI 1.3a socket
- [Rear I/O] – Micro USB socket
- [Front I/O] – 2x USB 2.0 sockets
- Hardware Reset using original Master System II top shell button
- SD Card Reader mounted underneath cartridge slot cover
- Internal CSR Bluetooth 2.0 USB Adapter – 100m
Whilst reading the Raspberry Pi forums, I came across an interesting topic discussing a P6 PIN header to perform a hardware reset: http://www.raspberrypi.org/forums/viewtopic.php?f=45&t=58754
Finding no spare two PIN headers in my components tub, I ventures over to eBay to find the cheapest seller for 2.54 mm pin headers…..which are sold in strips of 40…..in quantities of 2…..at least I’ll have spares.
Case Project Continued
The first issue was discovered with the cartridge slot guide in the top shell of the Master System II. The guide is designed to encase the slot interface on the main board in plastic. For this reason, the plastic travels very deep within the shell and occupies a large amount of space. Continue reading
I decided after viewing other people’s projects over at PetRockBlog’s forums that my Raspberry Pi could also do with a unique themed gaming case.
I quite liked the idea of a Nintendo Entertainment System, but they are difficult and quite expensive to come by when you decide you want one: eBay £25+, scratched / broken / missing cover and wee coloured (pun intended).